Gasoline Specifications (U.S. and Canada Only)
At a minimum, gasoline should meet ASTM specification D 4814 in the United States or CAN/CGSB—3.5 or 3.511 in Canada. Some gasolines contain an octane-enhancing additive called methylcyclopentadienyl manganese tricarbonyl (MMT). We recommend against the use of gasolines containing MMT. See Fuel Additives for additional information.
See also:
Storing the Tire Sealant
and Compressor Kit
(Coupe)
The tire sealant and compressor kit
is located in the trunk in one of the
following locations.
1. Open the trunk. See Trunk
(Sedan, Coupe).
2. Remove the retainer that holds
the tire sea ...
Safety
Four-wheel-disc, antilock brakes are standard. A standard electronic
stability system uses rollover mitigation technology that senses impending
rollovers and attempts to avert them by applying ind ...
Traction – AA, A, B, C
The traction grades, from
highest to lowest, are AA, A,
B, and C. Those grades
represent the tire's ability to
stop on wet pavement as
measured under controlled
conditions on specified
g ...