Erasing Speed Memory

The cruise control set speed is erased from memory by pressing Object Detection or if the ignition is turned off.

    See also:

    SBZA Detection Zones
    The SBZA sensor covers a zone of approximately one lane over from both sides of the vehicle, 3.5m (11 ft). This zone starts at each side mirror and goes back approximately 5.0m(16 ft). The heigh ...

    Making a Call
    Calls can be made using the following commands. Dial or Call: The dial or call command can be used interchangeably to dial a phone number or a stored name tag. Digit Dial: This command allows a ...

    Setting the Power Liftgate 3/4 Mode
    To change the liftgate stop position. 1. Turn the liftgate switch to either the MAX, or the 3/4 mode position and power open the liftgate. 2. Stop the liftgate movement at the desired height by p ...