Vehicle Messages
Messages displayed on the DIC indicate the status of the vehicle or some action that may be needed to correct a condition. Multiple messages may display one after the other.
The messages that do not require immediate action can be acknowledged and cleared by pressing SET/CLR. The messages that require immediate action cannot be cleared until that action is performed. All messages should be taken seriously and clearing the messages does not correct the problem.
See also:
Starting the Vehicle Messages
PRESS BRAKE TO START VEHICLE
This message is displayed when attempting to start the vehicle without first
pressing the brake pedal.
SERVICE KEYLESS START SYSTEM
This message is displayed if ...
When to Check and Change Automatic Transmission Fluid
It is usually not necessary to check the transmission fluid level. The only reason
for fluid loss is a transmission leak or overheating the transmission. If a small
leak is suspected, then use the ...
Power Reclining Seatbacks
To adjust a power seatback,
if equipped:
- Tilt the top of the vertical control
rearward to recline.
- Tilt the top of the vertical control
forward to raise. ...