Starting the Vehicle Messages
PRESS BRAKE TO START VEHICLE
This message is displayed when attempting to start the vehicle without first pressing the brake pedal.
SERVICE KEYLESS START SYSTEM
This message is displayed if there is a problem with the pushbutton start system. Take the vehicle to your dealer for service.
See also:
How the System Works
URPA comes on automatically
when the shift lever is moved into
R (Reverse). A single tone sounds
to indicate the system is working.
URPA operates only at speeds less
than 8 km/h (5 mph).
An ...
Engine Cooling When Trailer
Towing
The cooling system may temporarily
overheat during severe operating
conditions. See Engine Overheating. ...
Turn Signal Lamps
To replace one of these bulbs:
1. Open the liftgate. See Liftgate .
A. Push Pin
B. Taillamp Cover
2. Pull on push pin (A) to release the taillamp cover (B).
3. Remove the taillamp cover ...






