Dual Tone Multi-Frequency (DTMF) Tones

The in—vehicle Bluetooth system can send numbers during a call. This is used when calling a menu—driven phone system.

1. Turn or press the MENU/ SELECT knob and select Enter Number.
2. Enter the character sequence.

See “Entering a Character Sequence” in Operation for more information.

    See also:

    Connecting a USB Storage Device or iPod®
    The USB Port, located on the instrument panel or in the center console, can be used to control an iPod or a USB storage device. To avoid connection problems, extension cords are not recommended. Us ...

    EPB Release
    To release the EPB, place the ignition in the ON/RUN position, apply and hold the brake pedal, and push down momentarily on the EPB switch. If you attempt to release the EPB without the brake pedal ...

    Door Locks
    There are several ways to lock and unlock the vehicle. From outside, use the Remote Keyless Entry (RKE) transmitter or the key in the driver door. From inside, use the power door locks or the manu ...