CALIBRATION COMPLETE

This message displays when the compass calibration is complete.

See Compass for more information.

    See also:

    Daytime Running Lamp (DRL) (Uplevel)
    1. From the back side of the headlamp assembly, remove the bottom cap to replace the DRL bulb. 2. Disconnect electrical connector. 3. Remove the DRL bulb socket from the headlamp assembly. 4. ...

    Ending Cruise Control
    There are three ways to end cruise control: To disengage cruise control, step lightly on the brake pedal. Press on the steering wheel. To turn off the cruise control, press on the steering ...

    Headlamp High/Low-Beam Changer
    Push the turn signal/lane change lever away from you and release, to turn the high beams on. To return to low beams, push the lever again or pull it toward you and release. This indicator lig ...