Shifting Into Park
WARNING
It can be dangerous to get out of the vehicle if the shift lever is not fully
in P (Park) with the parking brake firmly set. The vehicle can roll. If you
have left the engine running, the vehicle can move suddenly. You or others
could be injured. To be sure the vehicle will not move, even when you are on
fairly level ground, use the steps that follow.
1. Hold the brake pedal down and set the parking brake.
See Parking Brake for more information.
2. Move the shift lever into P (Park) by pushing the lever all the way toward the front of the vehicle.
3. Turn the ignition off.
See also:
Lower Anchors
Lower anchors (A) are metal bars built into the vehicle.
There are two lower anchors for each LATCH seating position that will
accommodate a child restraint with lower attachments (B). ...
Air Vents
Use the air outlets located in the
center and on the side of the
instrument panel to direct the
airflow. Use the thumbwheels near
the air outlets to open or close off
the airflow.
Operation ...
Manual Mode
Driver Shift Control (DSC)
The vehicle has Driver Shift Control (DSC). DSC controls the vehicle's transmission
and vehicle speed while driving down hill or towing a trailer by allowing you to ...