Side Blind Zone Alert (SBZA)
If available, this feature will alert you to vehicles located in the vehicle's side blind zone. When the system detects a vehicle in the side blind zone, the SBZA display will light up in the corresponding outside side mirror.
The system is enabled at every vehicle startup. It can be disabled through the Driver Information Center (DIC).
If the message SIDE BLIND ZONE SYSTEM UNAVAILABLE appears on the DIC, the system has been disabled because the sensor is blocked and cannot detect vehicles in the blind zone. The sensor may be blocked by mud, dirt, snow, ice, slush, or even heavy rainstorms. This message may also activate during heavy rain or due to road spray. The vehicle does not need service.
See Side Blind Zone Alert (SBZA) for more information.
See also:
When the Light Flashes First and Then Is On Steady
If the light flashes for about a
minute and then stays on, there
may be a problem with the TPMS.
If the problem is not corrected, the
light will come on at every ignition
cycle. See Tire Pres ...
Map Data Updates
The navigation map database is stored on a compact flash card. It is usable only
in this type of navigation system, and will not function in other electronic devices.
The map in the vehicle was ins ...
Shutting the Engine Off After a Remote Start
To cancel a remote start, do any of the following:
- Press until the parking lamps turn off.
- Turn on the hazard warning flashers.
- Turn the vehicle on and then back off. ...