Park Tilt Mirrors
If the vehicle has the memory package, the passenger and/or driver mirror tilts to a preselected position when the vehicle is in R (Reverse). This feature lets the driver view the curb when parallel parking. The mirror(s) return to the original position when the vehicle is shifted out of R (Reverse), or the ignition is turned off or to OFF/LOCK.
Turn this feature on or off through the Driver Information Center (DIC). See Driver Information Center (DIC) for more information.
See also:
Flash-to-Pass
The flash—to—pass feature works with the low beams or Daytime Running Lamps
(DRL) on or off.
To flash the high beams, pull the turn signal/lane change lever all the way
toward you, then release i ...
Exiting the Feature
Settings Menu
The feature settings menu will be
exited when any of the following
occurs:
- The vehicle is no longer in
ON/RUN.
- The trip/fuel or vehicle
information DIC buttons are
pressed.
- The end ...
Daytime Running Lamp (DRL) (Uplevel)
1. From the back side of the headlamp assembly, remove the bottom cap to
replace the DRL bulb.
2. Disconnect electrical connector.
3. Remove the DRL bulb socket from the headlamp assembly.
4. ...