Shifting Into Park
WARNING
It can be dangerous to get out of the vehicle if the shift lever is not fully in P (Park) with the parking brake firmly set. The vehicle can roll. If you have left the engine running, the vehicle can move suddenly. You or others could be injured. To be sure the vehicle will not move, even when you are on fairly level ground, use the steps that follow. If you are pulling a trailer, see Driving Characteristics and Towing Tips .
1. Hold the brake pedal down, then set the parking brake.
2. Move the shift lever into the P (Park) position by pulling the shift lever toward you and moving it up as far as it will go.
3. Turn the ignition key to LOCK/OFF.
4. Remove the key and take it with you. If you can leave the vehicle with the ignition key in your hand, the vehicle is in P (Park).
See also:
Rear Compartment Fuse Block
The rear compartment fuse block is located in the cargo area, on the driver
side of the vehicle behind the lower trim panel. To open, turn the latch with a
flat bladed tool and pull the trim pan ...
Interior Style
The SRX's interior has the same commitment to angular surfaces as the
exterior, and it looks cohesive throughout the cabin. Our test model came with
an optional moonroof that covered two rows of s ...
California Proposition 65 Warning
Most motor vehicles, including this one, contain and/or emit chemicals known
to the State of California to cause cancer and birth defects or other reproductive
harm. Engine exhaust, many parts and ...