How the System Works

The SBZA symbol lights up in the side mirrors when the system detects a vehicle in the side blind zone, indicating it may be unsafe to change lanes. Before making a lane change, check the SBZA display, check all mirrors, glance over your shoulder, and use the turn signals.

When the vehicle is started, both outside mirror SBZA displays will briefly come

When the vehicle is started, both outside mirror SBZA displays will briefly come on to indicate the system is operating. When the vehicle is moving forward, the left or right side mirror display will light up if a vehicle is detected in that blind zone. If the turn signal is activated and a vehicle is also detected on the same side, the display will flash to give you extra warning not to change lanes.

At speeds greater then 32 km/h (20 mph), SBZA displays may come on when approaching or passing other vehicles. SBZA displays may come on when a passed vehicle remains in or drops back into the detection zone. SBZA can be disabled through the Driver Information Center (DIC). See Driver Information Center (DIC)  . If SBZA is disabled by the driver, the SBZA mirror displays will not light up.

    See also:

    Vehicle Messages
    Messages displayed on the DIC indicate the status of the vehicle or some action that may be needed to correct a condition. Multiple messages may display one after the other. The messages that do ...

    Vehicle Customization
    Some vehicle features can be programmed by using the DIC buttons next to the steering wheel. These features include: Language Door Lock and Unlock Settings RKE Lock and Unlock Feedback Lig ...

    All-Wheel Drive
    If the vehicle has this feature, engine power is sent to all four wheels when extra traction is needed. This is like four-wheel drive, but there is no separate lever or switch to engage or disenga ...