Using Voice Commands During a Planned Route
Cancel Route
1. Push
. System responds: “OnStar
ready,” then a tone. Say “Cancel route.” System responds: “Would you like to cancel
route directions to your destination?”
2. Say “Yes.” System responds: “OK, route canceled.”
3. Say “Goodbye.” Exits voice commands.
Route Preview
1. Push
. System responds: “OnStar
ready,” then a tone.
2. Say “Route Preview.” System responds with the next three maneuvers.
3. Say “Goodbye.” Exits voice commands.
Repeat
1. Push
. System responds: “OnStar
ready,” then a tone.
2. Say “Repeat.” System responds with the last direction given, then responds with “OnStar ready,” then a tone.
3. Say “Goodbye.” Exits voice commands.
Get My Destination
1. Push
. System responds: “OnStar
ready,” then a tone.
2. Say “Get my destination.” System responds with miles to the destination, then responds with “OnStar ready,” then a tone.
3. Say “Goodbye.” Exits voice commands.
See also:
Wiper Blades
Wiper blades need to be cleaned
and kept in good condition to
provide a clear view.
- Signs of wear include streaking,
skipping across the windshield,
and worn or split rubber.
- Trained dea ...
Cellular and GPS Antennas
Avoid placing items over or near
the antenna to prevent blocking
cellular and GPS signal reception.
Cellular reception is required for
OnStar to send remote signals to
the vehicle. ...
Power Door Locks
Press or
on the Remote Keyless Entry (RKE) transmitter.
See Remote Keyless Entry (RKE) System Operation .
Premium Trim Shown, Up-Level Similar
(Lock): Press to lock the doors.
(Unloc ...






