Manual Transmission
Skip Shift (CTS–V)
Under light acceleration, the transmission will only allow shifting from 1 (First) to 4 (Fourth).
This helps improve fuel mileage.
Under harder acceleration, Skip Shift is disabled, and all gears are available. See Manual Transmission.
See also:
There is also important loading information on the vehicle Certification/Tire
label. It tells you the Gross Vehicle Weight Rating (GVWR) and the Gross Axle Weight
Rating (GAWR) for the front and r
Steps for Determining Correct Load Limit
1. Locate the statement “The combined weight of occupants and cargo should never
exceed XXX kg or XXX lbs” on your vehicle's placard.
2. Determine the ...
Traction Control System (TCS)/StabiliTrak® Light
The TCS/StabiliTrak light comes on briefly when the engine is started.
If the light does not come on or stays on, have the vehicle serviced by the dealer.
If the system is working normally, the i ...
Leaving After Parking on a Hill
1. Apply and hold the brake pedal
while you:
1.1. Start the engine.
1.2. Shift into a gear.
1.3. Release the parking brake.
2. Let up on the brake pedal.
3. Drive slowly until the trailer is
...