See also:

Compass Calibration Procedure
1. Before calibrating the compass, check that the compass is set to the correct variance zone. See “Compass Variance (Zone) Procedure” earlier in this section. Do not operate any switches ...

Reducing Speed While Using Cruise Control
If the cruise control system is already activated, Press and hold the SET– button on the steering wheel until the desired lower speed is reached, then release it. To slow down in small amount ...

StabiliTrak® OFF Light
This light comes on briefly while starting the engine. If it does not, have the vehicle serviced by your dealer. If the system is working normally, the indicator light then goes off. Press and r ...