Head Restraints

See also:

EPB Release
To release the EPB, place the ignition in the ON/RUN position, apply and hold the brake pedal, and push down momentarily on the EPB switch. If you attempt to release the EPB without the brake pedal ...

Low-Beam Headlamps/Daytime Running Lamps (DRL), High-Beam Headlamps (Base)
1. From the back side of the headlamp assembly, remove the top cap to replace the low-beam headlamp/DRL bulb. 2. From the back side of the headlamp assembly, remove the bottom cap to repl ...

Nav (Navigation)
Press CONFIG to enter the configure menu options, then press CONFIG again, repeatedly until Nav is selected or press the Nav screen button. Voice Prompt Press the Voice Prompt screen button to c ...