Automatic Entry Recall
If entry/exit recall is programmed on in the vehicle personalization menu, automatic entry recall occurs when the ignition is turned on.
See Vehicle Personalization.
To stop recall movement, press one of the power seat, memory, or outside mirror buttons, or the power steering column switch, if equipped.
If something has blocked the driver seat or the steering column while recalling a memory position, the recall may stop. Remove the obstruction; then press the appropriate control for the area that is not recalling for two seconds.
Try recalling the memory position again by pressing the appropriate memory button. If the memory position is still not recalling, see your dealer for service.
See also:
Introduction
The names, logos, emblems,
slogans, vehicle model names, and
vehicle body designs appearing in
this manual including, but not limited
to, GM, the GM logo, CADILLAC,
the CADILLAC Crest and ...
Driving in Mud, Sand, Snow, or Ice
Use a low gear when driving in mud – the deeper the mud, the lower the gear.
Keep the vehicle moving to avoid getting stuck.
Traction changes when driving on sand. On loose sand, such as on beaches ...
Increasing Speed While Using
Cruise Control
If the cruise control system is
already activated:
- Press and hold the +RES button
on the steering wheel until the
desired speed is reached, then
release it.
- To increase vehicle speed in ...