See also:

Leaving After Parking on a Hill
1. Apply and hold the brake pedal while you: 1.1. Start the engine. 1.2. Shift into a gear. 1.3. Release the parking brake. 2. Let up on the brake pedal. 3. Drive slowly until the trailer is ...

License Plate Lamp
To replace one of these bulbs: 1. Open the liftgate. See Liftgate for more information. Passenger Side Shown, Driver Side Similar 2. Push the left end of the lamp assembly towards the ri ...

Starter Switch Check
WARNING When you are doing this inspection, the vehicle could move suddenly. If the vehicle moves, you or others could be injured. 1. Before starting this check, be sure there is enough room ...