Wiper Activated Headlamps
This feature activates the headlamps and parking lamps after the windshield wipers have been in use for about six seconds.
For this feature to work, the exterior lamp control must be in AUTO.
The wiper-activated headlamps immediately turn off, when the ignition is turned to LOCK/OFF or the windshield wiper control is turned off.
See also:
Back-Up Lamps
To replace one of these bulbs:
1. Open the liftgate. See Liftgate .
A. Push Pin
B. Taillamp Cover
2. Pull on push pin (A) to release the taillamp cover (B).
3. Remove the taillamp cover ...
Manual Operation of Power Liftgate
To change the liftgate to manual operation, press OFF on the liftgate switch.
With the power liftgate disabled and all of the doors unlocked, the liftgate
can be manually opened and closed.
To ope ...
Power Liftgate
On vehicles with a power liftgate, the switch is on the driver door.
The vehicle must be in P (Park) to use the power feature.
The taillamps flash when the power liftgate moves.
WARNING
...