High-Beam On Light
The high–beam on light comes on when the high-beam headlamps are in use.
See Headlamp High/Low-Beam Changer for more information.
See also:
SBZA Detection Zones
The SBZA sensor covers a zone
of approximately one lane over
from both sides of the vehicle,
or 3.5m(11 ft). This zone starts at
each side mirror and goes back
approximately 5.0 m(16 ft).
T ...
Towing the Vehicle
Notice: To avoid damage, the
disabled vehicle should be
towed with all four wheels off
the ground. Care must be taken
with vehicles that have low
ground clearance and/or special
equipment. ...
Throttle and Brake Pedal Adjustment
If the vehicle has this feature, the position of the throttle and brake
pedals can be adjusted.
The switch used to adjust the pedals is located on the right side of the
steering column, below the ...