Information Displays
See also:
Setting the Power Liftgate 3/4 Mode
To change the liftgate stop position.
1. Turn the liftgate switch to either the MAX, or the 3/4 mode position and
power open the liftgate.
2. Stop the liftgate movement at the desired height by p ...
Brake Fluid
The brake master cylinder reservoir
is filled with DOT 3 brake fluid as
indicated on the reservoir cap.
See Engine Compartment Overview for the location of the
reservoir.
There are only two ...
Rear Vision Camera Location
The camera is located above the license plate.
The area displayed by the camera is limited.
It does not display objects that are close to either corner or under the
bumper and can vary depe ...