Key and Lock Messages

See also:

Entering the Feature Settings Menu
1. Turn the ignition on. To avoid excessive drain on the battery, it is recommended that the headlamps are turned off. 2. Press the customization button to enter the feature settings menu. ...

Engine Cover
Engine Cover (CTS) To remove: 1. Remove the oil fill cap (A). 2. Raise the right front corner of the engine cover (B) to release it from the ball stud. 3. Pull the engine cover (B) forward ...

Storing the Tire Sealant and Compressor Kit
The tire sealant and compressor kit is located under the storage tray on the driver side trim panel (over the rear wheelhouse). To access the tire sealant and compressor kit: 1. Remove the tray ...