TRACTION CONTROL OFF
This message displays when the traction control system has been turned off.
See also:
EPB Release
To release the EPB, turn the ignition
switch to the ON/RUN position,
apply and hold the brake pedal, and
push down momentarily on the EPB
switch. If you attempt to release
the EPB without th ...
After Off-Road Driving
Remove any brush or debris that has collected on the underbody or chassis, or
under the hood. These accumulations can be a fire hazard.
After operation in mud or sand, have the brake linings cleane ...
Removing the Crossrails
1. Move both levers of the crossrail
into the upper forward position.
2. Slide the crossrail into the
cut-out area.
3. Remove the crossrail from the
vehicle.
4. Repeat for the other crossrail ...






