SERVICE TIRE MONITOR SYSTEM
This message displays if a part on the Tire Pressure Monitor System (TPMS) is not working properly.
The tire pressure light also flashes and then remains on during the same ignition cycle. See Tire Pressure Light.
Several conditions may cause this message to appear. See Tire Pressure Monitor Operation for more information.
If the warning comes on and stays on, there may be a problem with the TPMS. See your dealer.
See also:
Ignition Positions
The ignition switch has four different positions.
To shift out of P (Park), the ignition must be in ON/RUN or ACC/ ACCESSORY and
the regular brake pedal must be applied.
A (STOPPING THE ENGINE/ ...
Safety Chains
Always attach chains between the vehicle and the trailer. Cross the safety chains
under the tongue of the trailer to help prevent the tongue from contacting the road
if it becomes separated from t ...
Safety System Check
Now and then, check that the safety belt reminder light, safety belts, buckles,
latch plates, retractors, and anchorages are all working properly. Look for any
other loose or damaged safety belt s ...