Approach Lighting
This feature allows you to select whether or not to have the exterior lights turn on briefly during low light periods after unlocking the vehicle using the Remote Keyless Entry (RKE) or keyless access transmitter.
Press the customization button until Approach Lighting appears on the DIC display. Press the set/reset button once to access the settings for this feature. Then press the menu up/down button to scroll through the following settings.
Off: The exterior lights will not turn on when you unlock the vehicle with the transmitter.
On (default): If it is dark enough outside, the exterior lights will turn on briefly when you unlock the vehicle with the transmitter.
The lights will remain on for 20 seconds or until the lock button on the transmitter is pressed, or the vehicle is no longer off.
See Remote Keyless Entry (RKE) System Operation (Keyless Access) or Remote Keyless Entry (RKE) System Operation (Key Access) for more information.
No Change: No change will be made to this feature. The current setting will remain.
To select a setting, press the set/reset button while the desired setting is displayed on the DIC.
See also:
Tire and Loading Information Label
Label Examp
A vehicle-specific Tire and Loading Information label is attached to the
vehicle's center pillar (B-pillar). With the driver door open, the label is
attached near the door lock po ...
If No Steam Is Coming from the Engine Compartment
The ENGINE OVERHEATED STOP ENGINE or the ENGINE OVERHEATED IDLE ENGINE message,
along with a low coolant condition, can indicate a serious problem.
If there is an engine overheat warning, but see o ...
Grade Braking
The Grade Braking shift modes can be activated by pressing the button on the
end of the shift control lever. While in Range Selection Mode, Grade Braking is
deactivated allowing the driver to sele ...