Fog Lamps

Use the fog lamps for better vision

Use the fog lamps for better vision in foggy or misty conditions. The fog lamp control is located on the turn signal/multifunction lever.

band on the lever up to  and (Fog Lamps): Turn the fog lamp band on the lever up to release it, to turn the fog lamps on and release it, to turn the fog lamps on or off. The band will return to its original position.

The parking lamps must be on for the fog lamps to work.

If the high-beam headlamps are turned on, the fog lamps will also turn off. They will turn back on again when you change back to low-beam headlamps.

Some localities have laws that require the headlamps to be on along with the fog lamps.

    See also:

    Reclining Seatbacks
    To adjust the seatback: Tilt the top of the control rearward to recline. Tilt the top of the control forward to raise. See Reclining Seatbacks  . ...

    Dinghy Towing
    Front-wheel—drive and all-wheel-drive vehicles may be dinghy towed from the front. These vehicles can also be towed by placing them on a platform trailer with all four wheels off of the ground. F ...

    Increasing Speed While Using Cruise Control
    If the cruise control system is already activated: - Press and hold the +RES button on the steering wheel until the desired speed is reached, then release it. - To increase vehicle speed in ...