Ending Cruise Control
There are four ways to end cruise control:
- Step lightly on the brake pedal (manual and automatic transmissions).
- Press the clutch pedal to the floor (manual transmissions).
- Press 
on the steering wheel.
- To turn off the cruise control,
press 
on the steering wheel.
See also:
Dome Lamps
The dome lamp controls are located in the overhead console.
To change the dome lamp settings, press the following:
: Turns the lamp off, even when a door is open.
: The lamp comes on auto ...
Compass Calibration Procedure
1. Before calibrating the compass,
check that the compass is set
to the correct variance zone.
See “Compass Variance (Zone)
Procedure” earlier in this
section.
Do not operate any switches
...
Filling the Tank
WARNING
Fuel vapor burns violently and a fuel fire can cause bad injuries.
To help avoid injuries to you and others, read and follow all the instructions
on the fuel pump island. Turn off the engi ...