Manual Reclining Seatbacks

WARNING!
If either seatback is not locked, it could move forward in a sudden stop or crash. That could cause injury to the person sitting there.
Always push and pull on the seatbacks to be sure they are locked.

To recline a manual seatback:

1. Lift the lever.

1. Lift the lever.

2. Move the seatback to the desired position, and then release the lever to lock the seatback in place.

3. Push and pull on the seatback to make sure it is locked.

To return the seatback to the upright position:

1. Lift the lever fully without applying pressure to the seatback, and the seatback will return to the upright position.

2. Push and pull on the seatback to make sure it is locked.

    See also:

    TPMS Malfunction Light and Message
    The TPMS will not function properly if one or more of the TPMS sensors are missing or inoperable. When the system detects a malfunction, the low tire pressure warning light flashes for about one min ...

    Brake System Messages
    BRAKE FLUID LOW This message is displayed when the brake fluid level is low. See Brake Fluid. BRAKES OVERHEATED This message is displayed when the brakes are becoming overheated. You may ...

    Shifting out of Park
    This vehicle is equipped with an electronic shift lock release system. The shift lock release is designed to: - Prevent ignition key removal unless the shift lever is in P (Park) with the sh ...