See also:

Entering the Feature Settings Menu
1. Turn the ignition on. To avoid excessive drain on the battery, it is recommended that the headlamps are turned off. 2. Press the customization button to enter the feature settings menu. ...

Flash-to-Pass
The flash—to—pass feature works with the low beams or Daytime Running Lamps (DRL) on or off. To flash the high beams, pull the turn signal/lane change lever all the way toward you, then release i ...

Removing the Crossrails
1. Move both levers of the crossrail into the upper forward position. 2. Slide the crossrail into the cut-out area. 3. Remove the crossrail from the vehicle. 4. Repeat for the other crossrail ...