Easy Exit Driver Seat
This feature moves the seat rearward allowing the driver more room to exit the vehicle.
To activate, place the ignition in OFF and open the driver door. If the driver door is already open, placing the ignition in OFF will activate the easy exit driver seat.
This feature is turned on or off using the vehicle personalization menu.
See also:
Cargo Net
WARNING
Do not stack items higher than the upper end of the cargo net or hang anything
from the net.
Avoid items that have sharp edges or that apply excessive force to the net. If
items are not p ...
Limited-Slip Rear Axle
Vehicles with a limited-slip rear axle
can give more traction on snow,
mud, ice, sand, or gravel. When
traction is low, this feature allows
the drive wheel with the most
traction to move the ...
Reducing Speed While Using Cruise Control
If the cruise control system is already activated,
Press and hold the SET– button on the steering wheel until the desired
lower speed is reached, then release it.
To slow down in small amount ...