Memory Features
On vehicles with the memory feature, the “1” and “2” buttons on the outboard side of the driver seat are used to manually save and recall the positions of the driver seat, outside mirrors, and adjustable throttle and brake pedals, if available. These manually stored positions are referred to as Button Memory positions.
The vehicle will also automatically save driver seat, outside mirror, and adjustable throttle and brake pedal positions to the current driver Remote Keyless Entry (RKE) transmitter when the ignition is turned off. These automatically stored positions are referred to as RKE Memory positions.
See also:
Safety Locks
The vehicle has rear door security locks to prevent passengers from opening the
rear doors from the inside.
Open the rear doors to access the security locks on the inside edge of each door.
To s ...
Conditions in Which Remote Start Will Not Work
The remote vehicle start feature
will not operate if any of the
following occur:
- The ignition is in any position
other than LOCK/OFF.
- A keyless access transmitter is
inside the vehicle.
...
When to Add Engine Oil
If the oil is below the cross-hatched
area at the tip of the dipstick, add
1 L (1 qt) of the recommended oil
and then recheck the level. See
“Selecting the Right Engine Oil” in
this section ...