See also:

Install the Cargo Cover
1. Hold the cartridge so that the pull-out shade faces the rear of the vehicle. 2. Align the cartridge over the pins on the trim panels of the vehicle. 3. Push down on the cartridge to snap i ...

EPB Release
To release the EPB, place the ignition in the ON/RUN position, apply and hold the brake pedal, and push down momentarily on the EPB switch. If you attempt to release the EPB without the brake pedal ...

Bulb Replacement
For the proper type of replacement bulbs, see Replacement Bulbs. For any bulb changing procedure not listed in this section, contact your dealer. ...