Dome Lamps

The dome lamp controls are located in the overhead console.

border=0>

To change the dome lamp settings, press the following:

border=0>: Turns the lamp off, even when a door is open.: Turns the lamp off, even when a door is open.

border=0>: The lamp comes on automatically when a door is opened.: The lamp comes on automatically when a door is opened.

border=0>: Turns the dome lamp on.: Turns the dome lamp on.

    See also:

    EPB Release
    To release the EPB, place the ignition in the ON/RUN position, apply and hold the brake pedal, and push down momentarily on the EPB switch. If you attempt to release the EPB without the brake pedal ...

    Recording from MP3/WMA Discs or USB Storage Devices
    USB Host Support The USB connector uses the USB standards, 1.1 and 2.0. USB—Supported Devices - USB Flash Drives - Portable USB Hard Drives Recording to MEM Press REC, then select “Rec ...

    Keyless Trunk/Liftgate Opening
    Press the trunk/liftgate release button located above the license plate to open the trunk/liftgate if the keyless access transmitter is within range. See Trunk (Sedan, Coupe) for additional ...