Doors

See also:

EPB Release
To release the EPB, place the ignition in the ON/RUN position, apply and hold the brake pedal, and push down momentarily on the EPB switch. If you attempt to release the EPB without the brake pedal ...

SBZA Detection Zones
The SBZA sensor covers a zone of approximately one lane over from both sides of the vehicle, or 3.5m(11 ft). This zone starts at each side mirror and goes back approximately 5.0 m(16 ft). T ...

Side Bolster
To adjust the side bolster support, if equipped: - Press the top or bottom of the control (A) to increase or decrease support in the seat cushion bolsters. - Press the top or bottom of the ...