Lower Anchors and Tethers for Children (LATCH System)
The LATCH system holds a child restraint during driving or in a crash.
This system is designed to make installation of a child restraint easier.
The LATCH system uses anchors in the vehicle and attachments on the child restraint that are made for use with the LATCH system.
Make sure that a LATCH-compatible child restraint is properly installed using the anchors, or use the vehicle's safety belts to secure the restraint, following the instructions that came with that restraint, and also the instructions in this manual.
When installing a child restraint with a top tether, you must also use either the lower anchors or the safety belts to properly secure the child restraint. A child restraint must never be installed using only the top tether and anchor.
In order to use the LATCH system in your vehicle, you need a child restraint that has LATCH attachments. The child restraint manufacturer will provide you with instructions on how to use the child restraint and its attachments.
The following explains how to attach a child restraint with these attachments in your vehicle.
Not all vehicle seating positions or child restraints have lower anchors and attachments or top tether anchors and attachments.
See also:
Exterior
The 2007 Escalade EXT is roughly the same size as its predecessor, losing 1.5
inches of height but gaining an inch of length. Cargo room is up, with a rear
cargo bed that has 45.5 cubic feet of vo ...
If the On Indicator Is Lit for a Child Restraint
If a child restraint has been installed
and the on indicator is lit:
1. Turn the vehicle off.
2. Remove the child restraint from
the vehicle.
3. Remove any additional items
from the seat such ...
Ride Control System Messages
SERVICE STABILITRAK
If your vehicle has StabiliTrak and this message displays, it means there may
be a problem with the StabiliTrak system. If you see this message, try to reset
the system. Stop; ...