See also:

Hitch Cover (with Dual Exhaust)
To remove the hitch cover: 1. Turn the fasteners on the lower tabs 90 degrees counterclockwise. 2. Pull the lower edge of the cover out slightly. 3. Lift the cover up off the upper bracket. To r ...

Tire and Loading Information Label
Label Example A vehicle specific Tire and Loading Information label is attached to the center pillar (B-pillar). With the driver door open, you will find the label attached below the door lock ...

Storing the Tire Sealant and Compressor Kit
The tire sealant and compressor kit is located under the storage tray on the driver side trim panel (over the rear wheelhouse). To access the tire sealant and compressor kit: 1. Remove the tray ...