SIDE BLIND ZONE ALERT SYSTEM TEMPORARILY UNAVAILABLE
This message indicates that the SBZA system is disabled because the sensor is blocked and cannot detect vehicles in the blind zone.
The sensor may be blocked by mud, dirt, snow, ice, or slush.
This message may also activate during heavy rain or due to road spray. The vehicle does not need service. For cleaning, see Exterior Care.
See also:
Battery Replacement
To change the remote control batteries:
1. Slide the rear cover back on the remote control.
2. Replace the two batteries in the compartment. Make sure they are installed
correctly using the diagra ...
Timer
This display can be used as a timer. To start the timer, press SET/CLR while
Timer is displayed.
The display will show the amount of time that has passed since the timer was
last reset. To stop t ...
Daytime Running Lamp (DRL) (Uplevel)
1. From the back side of the headlamp assembly, remove the bottom cap to
replace the DRL bulb.
2. Disconnect electrical connector.
3. Remove the DRL bulb socket from the headlamp assembly.
4. ...






