Entering the Feature Settings Menu
1. Turn the ignition on.
To avoid excessive drain on the battery, it is recommended that the headlamps are turned off.
2. Press the customization button to enter the feature settings menu.
See also:
When to Add Engine Oil
If the oil is below the cross-hatched area at the tip of the dipstick, add 1
L (1 qt) of the recommended oil and then recheck the level. See “Selecting the
Right Engine Oil” in this section for an e ...
Other Information
The Bluetooth word mark and logos are owned by the Bluetooth® SIG, Inc. and
any use of such marks by General Motors is under license.
Other trademarks and trade names are those of their respective ...
Headlamp High/Low-Beam Changer
Push the turn signal/lane change lever away from you and release, to turn
the high beams on. To return to low beams, push the lever again or pull it
toward you and release.
This indicator lig ...