See also:

Starting the Engine Using Remote Start
1. Press and release on the RKE transmitter. 2. Within two seconds, press and hold until the turn signal lamps flash. This confirms the request to remote start the vehicle has been received. If the ...

Removal and Installation of the Sealant Canister
To remove the sealant canister: 1. Unwrap the sealant hose. 2. Press the canister release button. 3. Pull up and remove the canister. 4. Replace with a new canister which is available from your ...

Passenger Safety Belt Reminder Light
When the vehicle is started this light flashes and a chime may come on to remind the front passenger to fasten their safety belt. Then the light stays on solid until the belt is buckled. This ...